is designed to be a multiple purpose coating, which solves painting and insulating problems. This thermal insulation coating product fulfills niche market areas of temperature under 400°F on all types of substrates.

DTI has been used successfully for heat exchangers, bag houses, rail cars, tanks, condensation lines, HVAC, personnel protection, radiant barrier control, etc. The coating works not only to reduce temperatures but also provides energy savings, and personnel protection all in an easy spray application. Since the products are applied in 20 mil (0.50 mm) thickness, they provide excellent corrosion protection as well.

DTI employs only the best in materials and has been specifically engineered in our own formulation lab for thermal insulating performance and long lasting durability. Our coatings are capable of sustained working loads of 400°F and peak temperatures up to 500°F (260°C).

NOTE: The Industrial version is NOT a reflective rooftop coating applied to the Industrial market. Delta T Industrial is specifically match formulated for Industrial Complexes and commercial atmospheres.

DTI can be effectively forecasted to your specific application. Please email us your project that includes substrate type, application, ambient conditions, product temperature, and overall desired result. The more information the better. We can then produce a thermal analysis for you that predict how our product will perform.

For an Introduction data sheet and information list below. For a PDF format, please click here to take you to our download section.

This spray applied thermal insulating coating is excellent for:

Heat exchanger protection - used for personnel protection.

Pan protection and heat retention - used to protect personnel and provide more efficiency for boilers.

Boiler protection and heat retention - used to protect personnel and provide more efficiency for boilers.

HVAC - used to control and eliminate condensation in plant areas.

Tanks - used to reduce thermal shock and increase control condensation. Also used for heat or cold retention.

Diffusers - used for heat retention and substrate protection.

Piping - used to insulate pipes and provide substrate protection. Personnel Protection - used to lower substrate temperatures within OSHA guidelines.

Extruders - used to help insulate and protect molds in plastic applications

Substrate protection and insulation - used in various industrial equipment to help insulate equipment against radiant heat gain.

Cold boxes - used to help insulate and reduce/eliminate condensation

---

By using our products, additional benefits include:

• Saving total installation time when compared to conventional insulator methods. No cutting, tapping or special hangers. No special fabrications needed.
• Adheres virtually to any material and eliminates the potential for surface corrosion or Corrosion under Insulation (CUI).
• The coating is a non-combustible, nonflammable, thermal insulation Class 1 (A) fire rated products. UL listed.
• Water based, one-part coating having no “pot life”.
• Can be applied to working substrates or areas without shutdown up to 400F.
• Reduces or eliminates the possibility of condensation.
• Lightweight (5.0 pounds per gallon). Approx 0.07 lbs/sq .ft. at 20 mil DFT (0.50mm).
• Can be "touched up" after minor structural repairs.
• Contains no harmful chlorides
• Successive coats will increase insulating capabilities.

Recommended substrates:

• All metal surfaces – steel surfaces may require primer systems
• Wood
• Fiberglass
• Concrete
• Masonry

For a complete list of approvals please call

MASCOAT PRODUCTS PTE LTD.

TEL: 65-62412339

FAX: 65-62411336

Email : Mascoat Singapore